Patton-electronic USB Manual do Utilizador

USER MANUAL Model 2192/USB/V.92USB Modem SALES OFFICE+1 (301) 975-1000TECHNICAL SUPPORT+1 (301) 975-1007www.patton.com Part# 07M2192 Rev. ADoc# 0940

10 5. Plug one end of the RJ-11 cable supplied with the modem into the RJ-11 jack (see Figure 6). Figure 6. RJ-11 port location 6. Plug the ot

11 8. Windows 98 detects the USB modem automatically and displays the message Add New Hardware Wizard , click Next to continue (see Figure 8).

12 5. Plug one end of the RJ-11 cable supplied with the modem into the RJ-11 jack (see Figure 6 on page 10). 6. Plug the other end of the RJ-11

13 3. Plug one end of the RJ-11 cable supplied with the modem into the RJ-11 jack (see Figure 6 on page 10). 4. Plug the other end of the RJ-11

14 Note The connection diagram in Figure 1 on page 7 includes an optional RJ-11 modular T adapter so the USB modem and a telephone can share the same

15 7. Insert the CD into your CD-ROM and the system will execute the setup.exe automatically. The Modem Installation window (see Figure 2 on p

16 4.0 SETTING UP AND USING MODEM-ON-HOLD The modem-on-hold feature requires the following:• Internet service from an ISP that supports V.92—Verify

17 The SmartUSB56 Voice Modem Properties control panel displays (see Figure 13). Figure 13. V.92 Features panel 2. Click the Modem on Hold tab

18 3. Select what you want the modem to do when a phone call is received while you’re online (see Figure 14 on page 17). 4. Click the OK butto

19 3. Select the country or area where the 2192 Modem is installed by selecting from the Country/Area pop-up menu (see Figure 16). Figure 16. C

2 CONTENTS1.0 Compliance and Trademarks... 3 1.1 FCC Notice ...

20 2. Click on the Soft Speaker > Enabled box so a check mark appears. 3. Move the speaker volume slider (see Figure 17 on page 19) to the

21 Making an outgoing call while online 1. To make an outgoing call while online, click on the icon in the system tray, the SmartUSB56 Voice Mod

22Note Your ISP controls how long the Internet connection can be on hold. 5. When your call is complete, click on the Resume my Internet Con-nection

23nection (see Figure 22). You will also hear a ringing sound if you have configured the Modem Settings control panel to have Soft Speaker enabled.Figu

24Note If you do not finish your call before the timer expires, your voice call will automatically be disconnected and you may also lose your Internet

255.0 DIAGNOSTICS5.1 WINDOWS 98/ME 1. Select Start > Settings >Control Panels. Then double-click on the Modems icon. 2. Click on the Diagn

26Notes_______________________________________________________________________________________________________________________________________________

27Notes_______________________________________________________________________________________________________________________________________________

28Notes_______________________________________________________________________________________________________________________________________________

3 1.0 COMPLIANCE AND TRADEMARKS1.1 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, purs

4 The REN is useful in determining the quantity of devices you may con-nect to your telephone line and still have those entire devices ring when your

5 2.0 GENERAL INFORMATION Congratulations on your purchase of this USB Modem. The Model 2192/USB/V.92 Modem features the latest innovations in high

6 • Modem-on-Hold• V.44 Data Compression QuickConnect Allows your modem to connect to the ISP faster than before. Very simply, QuickConnect shortens

7 3.0 INSTALLATION This chapter contains the following sections that describe installing the modem driver software:• Section 3.1, “Setting Up the Mo

8 1. Insert the CD into your CD-ROM and the system will execute the setup.exe automatically. The Modem Installation window (see Figure 2) will

9 3. Connect one end of the USB cable supplied with the modem to the USB port on the modem (see Figure 4). Figure 4. USB port location 4. Conn