Patton-electronic IM1/I Manual do Utilizador

USERMANUALMODEL IM 1/IEthernet Bridge ModuleSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.comPart# 07MIM1/I-EDoc# 090101U

8 95.0 I N S T A L L A T I O NThe Model IM1/I is completely plug and play. This section tells youhow to make the connections. 5.1 INSTALLING THE QU

10 75.2 CONNECTING TO THE 10BASE-T ETHERNET PORT The RJ-45 Ethernet port on Model IM1/I is designed to connectdirectly to a 10BaseT network. Figure

6 11For example, the customer site is assigned the addresses192.168.1.0/24 through 192.168.1.1/24. The address192.168.1.1/24 is also the default gatew

126.0 OPERATIONOnce the Model IM1/1 is installed, it should operate transparently.This sections describes power-up, general operating instructions, a

42.3 TYPICAL APPLICATIONThe Model IM1/I QuickConnect™ is designed to plug directly intothe rear of a Patton Electronics baseband modem (i.e. Model 10

14 3AP P E N D I X APATTON MODEL IM1/I SPECIFICATIONSLAN Connection: RJ-45, 10Base-T, 802.3 EthernetProtocol: PPP (RFC 1661) with Bridging Control

2 151.3 SERVICEAll warranty and nonwarranty repairs must be returned freightprepaid and insured to Patton Electronics. All returns must have aReturn

116Dear Valued Customer,Thank you for purchasing Patton Electronics products! We doappreciate your business. I trust that you find this user manual

116Dear Valued Customer,Thank you for purchasing Patton Electronics products! We doappreciate your business. I trust that you find this user manual

USERMANUALMODEL IM 1/IEthernet Bridge ModuleSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007http://www.patton.comPart# 07MIM1/I-EDoc# 090101U

2 151.3 SERVICEAll warranty and nonwarranty repairs must be returned freightprepaid and insured to Patton Electronics. All returns must have aReturn

14 3AP P E N D I X APATTON MODEL IM1/I SPECIFICATIONSLAN Connection: RJ-45, 10Base-T, 802.3 EthernetProtocol: PPP (RFC 1661) with Bridging Control

42.3 TYPICAL APPLICATIONThe Model IM1/I QuickConnect™ is designed to plug directly intothe rear of a Patton Electronics baseband modem (i.e. Model 10

126.0 OPERATIONOnce the Model IM1/1 is installed, it should operate transparently.This sections describes power-up, general operating instructions, a

6 11For example, the customer site is assigned the addresses192.168.1.0/24 through 192.168.1.1/24. The address192.168.1.1/24 is also the default gatew

10 75.2 CONNECTING TO THE 10BASE-T ETHERNET PORT The RJ-45 Ethernet port on Model IM1/I is designed to connectdirectly to a 10BaseT network. Figure

8 95.0 I N S T A L L A T I O NThe Model IM1/I is completely plug and play. This section tells youhow to make the connections. 5.1 INSTALLING THE QU